General Information 19Even if your setting is Enabled, you may also switch to the text mode whilebooting by pressing F9 after you see the message “Press to go to theSetup Utility”.When set to Disabled, BIOS is in the conventional text mode where you seethe system initialization details on the screenNum Lock This parameter displays whether the NumLock function on thekeyboard turns on automatically each time you turn your computer on. You canset this to On or Off. The default is On.First Boot Device This parameter allows you to set system boots fromFloppy, Floptical, SCSI Device, Network, Disabled, 2nd IDE HD, 3rd IDE HD,and 4th IDE HD. The default is Floppy.Second Boot Device This parameter allows you to set system boots fromATAPI CD-ROM, SCSI Device, Disabled, 2nd IDE HD, 3rd IDE HD, 4th IDEHD, and Floptical. The default is ATAPI CD-ROM.Third Boot Device This parameter allows you to set system boots from 1stIDE HD, 2nd IDE HD, 3rd IDE HD, 4th IDE HD, Floptical, SCSI Device, andDisabled. The default is 1st IDE HD.Date and TimeFrom the Setup main menu, select the Date and Time option to view or changethe system clock from the Date and Time menu. If you want to change thesystem date, enter the date in the format shown on the screen as in thefollowing example:Fri Jul 23, 1999If you want to change the time, enter the time in 24-hour format (hours,minutes, seconds). For example:- 12 midnight is 00:00:00- 12 noon is 12:00:00- 1 p.m. is 13:00:00When setting date and time, press the up- or down- arrow key to highlight afield. Press the left or right-arrow key to change the settings.Advanced OptionsFrom the Setup main menu, select the Advanced Options option to view orchange a variety of configuration settings. The Advanced Options menuappears, with the following options:• Security Options
