IBM InfoPrint 1540 User Manual

Contents

IBM InfoPrint 1540 User Manual Manual pdf 142 page image

Solving fax quality problems140TroubleshootingSolving fax quality problemsThe following solutions will help solve copy problems. For additional information, see Fax tips.Solving option problemsIf an option does not operate correctly after it is installed, or if it quits working:• Turn the MFP off, wait for about 10 seconds, and turn the MFP on. If this does not fix the problem, unplug the MFP,and check the connection between the option and MFP.• Print the menu settings page, and check to see if the option is listed in the Installed Options list. If the option is notlisted, reinstall it. See Printing the menu settings page for more information.• Make sure the option is selected in the software application you are using.The following table lists MFP options and suggested corrective actions for related problems. If the suggested correctiveaction does not fix the problem, call your service representative.Symptom SolutionThe fax document takes a longtime to transmit. Touch Options, then under Content, change the setting to Text, and then set theresolution to Standard.The images on the fax I sent arenot clear. Touch Options, then under Content, change the setting to Text/Photo or Photo.Increase the output resolution.Note: This will increase the amount of time required for the scan and will increase thequality of the fax output.Option ActionDrawers • Make sure the connection between drawers (250-sheet drawer, 500-sheet drawer, or 2000-sheetdrawer) or the connection between a drawer and a duplex unit or the MFP is secure.• Make sure the print media is loaded correctly. See Loading standard or optional 500-sheettrays for more details.Duplex unit • Make sure the connection between the duplex unit and the MFP is secure. If the duplex unit islisted on the menu settings page, but print media jams when it enters or exits the duplex unit, theMFP and duplex unit may not be properly aligned.• Make sure the duplex front access cover is securely installed.Flash memory Make sure flash memory is securely connected to the MFP system board.Internal printserver • Make sure the internal print server (also called an internal network adapter or INA) is securelyconnected to the MFP system board.• Make sure you are using the correct cable, that it is securely connected, and the networksoftware is correctly set up.See the Software and Documentation CD that shipped with the MFP for more details.Large capacityfeeder (2000-sheetdrawer)See Solving 2000-sheet drawer problems.MFP memory Make sure MFP memory is securely connected to the MFP system board.