Canceling a copy job32CopyingCanceling a copy jobWhile the document is in the ADFWhen the ADF begins processing a document, the scanning screen is displayed. You can cancel the copy job by touchingCancel Job on the touch screen.Touching Cancel Job cancels the entire job that is being scanned. The scanning screen will be replaced with a“Canceling scan job” screen. The ADF will clear any page that has started scanning and leave the other pages inthe ADF.While copying pages using the flatbedDuring the copy process, the “Scan the next page” screen appears. To cancel the copy job, touch Cancel Job on the touchscreen.Touching Cancel Job cancels the entire job that has been scanned. The scanning screen will be replaced with a“Canceling scan job” screen. Once the job has been flushed, the touch screen will return to the copy screen.When the pages are being printedTo cancel the print job, touch Cancel Job on the touch screen, or press cancel on the numeric keypad.Touching Cancel Job or pressing cancel on the keypad cancels the remaining print job. Once the job has beendeleted, the touch screen will return to the home screen.Copy tipsThe following tips may improve the MFP copy quality. For additional information or to solve copy problems, see Solvingcopy quality problems.Question TipWhen should I use Text mode? • Text mode should be used when text preservation is the main goal of the copy, andpreserving images copied from the original document is not a concern.• Text is best used for receipts, carbon copy forms, and documents that only containtext or fine line art.When should I use Text/Photomode? • Text/Photo mode should be used when copying an original document that containsa mixture of text and graphics.• Text/Photo is best used for magazine articles, business graphics, and brochures.When should I usePrinted Image mode? Printed Image mode should be used when copying halftone photographs, graphicssuch as documents printed on a laser printer, or pages from a magazine ornewspaper.When should I use Photographmode? Photograph mode should be used when the original document is a high-qualityphotograph or inkjet print.
