IBM System x3400 M3 Types 7378 Installation And User Manual

Also see for System x3400 M3 Types 7378: Problem determination and service guide Brochure Installation and user guide Product guide Product guide

Contents

interface (when you attempt to start the remote presence feature) indicating that thehardware key is required to use the remote presence feature.The remote presence feature provides the following functions:v Remotely viewing video with graphics resolutions up to 1600 x 1200 at 85 Hz,regardless of the system statev Remotely accessing the server, using the keyboard and mouse from a remoteclientv Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remoteclient, and mapping ISO and diskette image files as virtual drives that areavailable for use by the serverv Uploading a diskette image to the IMM memory and mapping it to the server as avirtual driveThe blue-screen capture feature captures the video display contents before the IMMrestarts the server when the IMM detects an operating-system hang condition. Asystem administrator can use the blue-screen capture to assist in determining thecause of the hang condition.Obtaining the IP address for the Web interface accessTo access the Web interface and use the remote presence feature, you need the IPaddress for the IMM. You can obtain the IMM IP address through the Setup utility.To locate the IP address, complete the following steps:1. Turn on the server.Note: Approximately 20 seconds after the server is connected to AC power, thepower-control button becomes active.2. When the prompt Setup is displayed, press F1. If you have set both apower-on password and an administrator password, you must type theadministrator password to access the full Setup utility menu.Attention: If you set an administrator password and then forget it, there is noway to change, override, or remove it. You must replace the system board.3. From the Setup utility main menu, select System Settings.4. On the next screen, select Integrated Management Module.5. On the next screen, select Network Configuration.6. Find the IP address and write it down.7. Exit from the Setup utility.Logging on to the Web interfaceTo log onto the Web interface to use the remote presence functions, complete thefollowing steps:1. Open a Web browser on a computer that connects to the server and in theaddress or URL field, type the IP address or host name of the IMM to whichyou want to connect.Notes:a. If you are logging on to the IMM for the first time after installation, the IMMdefaults to DHCP. If a DHCP host is not available, the IMM uses the defaultstatic IP address 192.168.70.125.b. You can obtain the DHCP-assigned IP address or the static IP address fromthe server UEFI or from your network administrator.114 IBM System x3400 M3 Types 7378 and 7379: Installation and User's Guide