IBM System x3400 M3 Types 7378 Installation And User Manual

Also see for System x3400 M3 Types 7378: Problem determination and service guide Brochure Installation and user guide Product guide Product guide

Contents

Table 1. Features and specifications (continued)Size:v Tower– Height: 440 mm (17.3 in.)– Depth: 767 mm (30.2 in.)– Width: 218 mm (8.6 in.)– Weight: approximately 37.85 kg(83.4 lb) when fully configuredor 27.1 kg (59.7 lb) minimumv Rack– 5 U– Height: 218 mm (8.6 in.)– Depth: 702 mm (27.6 in.)– Width: 424 mm (16.7 in.)– Weight: approximately 36 kg(79.3 lb) when fully configuredor 25.8 kg (56.9 lb) minimumRacks are marked in verticalincrements of 4.45 cm (1.75 inches).Each increment is referred to as aunit, or “U.” A 1-U-high device is 4.45cm (1.75 inches) tall.Integrated functions:v Integrated Management Module(IMM), which provides serviceprocessor control and monitoringfunctions, video controller, and(when the optional virtual mediakey is installed) remote keyboard,video, mouse, and remote harddisk drive capabilitiesv Dedicated or shared managementnetwork connectionsv Six-port Serial ATA (SATA)controller embeddedv Serial over LAN (SOL) and serialredirection over Telnet or SecureShell (SSH)v USB flash device with embeddedhypervisor software.v Support for remote managementpresencev One systems-management RJ-45for connection to a dedicatedsystems-management network.This system managementconnector is dedicated to the IMMfunctions.v Six Universal Serial Bus (USB)ports standard (v2.0 supportingv1.1)– Four on rear of server– Two on front of serverv One internal USB tape connectorv One Broadcom dual-port10/100/1000 Ethernet controllerwith Wake on LAN supportv One serial connector, shared withthe IMMNote: In messages anddocumentation, the term serviceprocessor refers to the integratedmanagement module (IMM).ServeRAID SAS adapter:v ServeRAID-BR10i SAS/SATAadapter that supports RAID levels 0,1 and 1E (standard)v ServeRAID-BR10il SAS/SATAadapter that supports RAID levels 0,1 and 1E (standard)v Upgradeable to ServeRAID-MR10iSAS/SATA adapter, which supportsRAID levels 0, 1, 5, 6, 10v Optional ServeRAID-MR10isSAS/SATA adapter, which supportsRAID levels 0, 1, 5, 6, 10v Optional ServeRAID-M1015SAS/SATA adapter, which supportsRAID levels 0, 1 and 1Ev Optional ServeRAID-M5014SAS/SATA adapter, which supportsRAID level 0, 1, 5, 10, 50v Optional ServeRAID-M5015SAS/SATA adapter, which supportsRAID level 0, 1, 5, 10, 50Note: If the server is configured forRAID operation using a ServeRAIDadapter, you might have toreconfigure your disk arrays afteryou install drives. See theServeRAID adapter documentationfor additional information aboutRAID operation and completeinstructions for using the ServeRAIDadapter.Acoustical noise emissions:v Sound power, idle: 5.5 bel declaredv Sound power, operating: 6.0 beldeclaredChapter 1. The System x3400 M3 server 7