Diagnostic text messagesDiagnostic text messages are displayed while the tests are running.A diagnostic text message contains one of the following results:Passed: The test was completed without any errors.Failed: The test detected an error.Aborted: The test could not proceed because of the server configuration.Additional information concerning test failures is available in the extendeddiagnostic results for each test.Viewing the test log results and transferring the DSA collectionUse this information to view the test log results and transferring the DSAcollection.About this taskTo view the test log for the results when the tests are completed, click the Successlink in the Status column, if you are running the DSA graphical user interface, ortype :x to exit the Execute Tests menu, if you are running the DSA interactivemenu, or select Diagnostic Event Log in the graphical user interface. To transferDSA Preboot collections to an external USB device, type the copy command in theDSA interactive menu.Procedurev If you are running the DSA graphical user interface (GUI), click the Success linkin the Status column.v If you are running the DSA interactive menu (CLI), type :x to exit the ExecuteTests menu; then, select completed tests to view the results.ResultsYou can also send the DSA error log to IBM support to aid in diagnosing theserver problems.Automated service request (call home)IBM provides tools that can automatically collect and send data or call IBMSupport when an error is detected. These tools can help IBM Support speed up theprocess of diagnosing problems.The following sections provide information about the call home tools.152 IBM System x3550 M4 Type 7914: Installation and Service Guide
