3. Click Obtain maintenance parts; then, follow the instructions to order the partfrom the retail store.Note: Changes are made periodically to the IBM website. The actual proceduremight vary slightly from what is described in this document.If you need help with your order, call the toll-free number that is listed on theretail parts page, or contact your local IBM representative for assistance.Power cordsFor your safety, a power cord with a grounded attachment plug is provided to usewith this product. To avoid electrical shock, always use the power cord and plugwith a properly grounded outlet.IBM power cords used in the United States and Canada are listed by Underwriter'sLaboratories (UL) and certified by the Canadian Standards Association (CSA).For units intended to be operated at 115 volts: Use a UL-listed and CSA-certifiedcord set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord,a maximum of 15 feet in length and a parallel blade, grounding-type attachmentplug rated 15 amperes, 125 volts.For units intended to be operated at 230 volts (U.S. use): Use a UL-listed andCSA-certified cord set consisting of a minimum 18 AWG, Type SVT or SJT,three-conductor cord, a maximum of 15 feet in length and a tandem blade,grounding-type attachment plug rated 15 amperes, 250 volts.For units intended to be operated at 230 volts (outside the U.S.): Use a cord setwith a grounding-type attachment plug. The cord set should have the appropriatesafety approvals for the country in which the equipment will be installed.Power cords for a specific country or region are usually available only in thatcountry or region.Power cord partnumber Used in these countries and regions39M5206 China39M5102 Australia, Fiji, Kiribati, Nauru, New Zealand, Papua New GuineaChapter 5. Parts listing, IBM System x3550 M4 Type 7914 193
