cannot configure Turbo Mode settings in Custom Mode. To have this screendisplay configurable fields properly, you may restore the Setup utility to thefactory default settings.– Integrated Management ModuleSelect this choice to view or change the settings for the integratedmanagement module.- POST Watchdog TimerSelect this choice to view or enable the POST watchdog timer.- POST Watchdog Timer ValueSelect this choice to view or set the POST loader watchdog timer value.- Reboot System on NMIEnable or disable restarting the system whenever a nonmaskable interrupt(NMI) occurs. Disabled is the default.- Commands on USB Interface PreferenceSelect this choice to enable or disable the Ethernet over USB interface onIMM.- Network ConfigurationSelect this choice to view the system management network interface port,the IMM MAC address, the current IMM IP address, and host name; definethe static IMM IP address, subnet mask, and gateway address; specifywhether to use the static IP address or have DHCP assign the IMM IPaddress; save the network changes; and reset the IMM.- Reset IMM to DefaultsSelect this choice to view or reset IMM to the default settings.- Reset IMMSelect this choice to reset IMM.– Legacy SupportSelect this choice to view or set legacy support.- Force Legacy Video on BootSelect this choice to force INT video support, if the operating system doesnot support UEFI Video Output Standards.- Rehook INT 19hSelect this choice to enable or disable devices from taking control of theboot process. The default is Disable.- Legacy Thunk SupportSelect this choice to enable or disable legacy thunk support.– Adapters and UEFI DriversSelect this choice to view information about the adapters and UEFI drivers inthe server. You can also select an adapter that you want to configure and starta configuration program.– NetworkSelect this choice to see all of the device options, such as the iSCSI, PXE,and Ethernet parameters.v Date and TimeSelect this choice to set the date and time in the server, in 24-hour format(hour:minute:second).v Start Options92 System x3620 M3 Type 7376: Installation and User’s Guide
