“Deleting a console configuration”You might need to delete an existing local console to meet your specific needs while using OperationsConsole. You must be a member of the Administrators group to delete a console.Changing a local console:About this taskTo change an existing local console, follow these steps:1. If your local console is connected to a system, disconnect it as follows; otherwise, go to step 2:a. Select the configuration name.b. From the Connection menu, click Disconnect. The connection status shows Disconnecting.c. Wait until the status shows Disconnected at the local console.2. Select the configuration name.3. From the Connection menu, click Properties.4. Select the Configuration tab.5. Make your changes and click OK.Changing a local console on a network (LAN):About this taskImportant: If network data will be changed, you need to delete and re-create the connectionconfiguration. Also, Operations Console should be closed and restarted before attempting toconnect a new configuration. This action will remove all cached values associated with anyold configurations.1. Select the configuration name.2. Click Disconnect. Wait until the status shows Disconnected at the console.3. Select the configuration name.4. From the Connection menu, click Properties.5. Select the Configuration tab.6. Make your changes and click OK.Deleting a console configurationYou might need to delete an existing local console to meet your specific needs while using OperationsConsole. You must be a member of the Administrators group to delete a console.About this taskNote: You may also use the Delete key on the keyboard. Just highlight the configuration you want todelete and press the Delete key.Related tasks“Changing a console configuration” on page 46You might need to change an existing local console to meet your needs while using OperationsConsole.Deleting a local console:About this taskTo delete an existing local console, follow these steps:1. If your local console is connected to a system, disconnect it as follows; otherwise, go to step 2:a. Select the configuration name from the Operations Console window.b. From the Connection menu, click Disconnect. The connection status shows Disconnecting.Operations Console 47
