10. Select Work with DST environment.11. Select System Devices (skip this step if using SST).12. Select Select Console.13. If you are currently using Operations Console local console on a network (LAN), select OperationsConsole local console on a network (LAN) and follow these steps to deallocate the network adapter:Note: If this resource will be used for the service tools server (System i Connections) or you plan touse the local console on a network (LAN) as a backup console then you do not need to do theclear operation. If either of these choices is true, continue with step 13e.a. Select Operations Console (LAN). The LAN adapter currently in use should be shown.b. Press F11.c. Press F6 to clear the configuration data.d. Press F7 to store this new value.e. Press F12 twice to exit this window.f. Select Console.14. Select Twinaxial.15. Press F3 to return to the DST main menu.ResultsThe system is now configured for use by your intended console type. You must do an initial programload (IPL) of the system so that it can use the new console.If you do not plan to use Operations Console as a backup console, do not remove or move it or itsadapter at this time. You may need it to debug problems.The system value QAUTOCFG must be set to ON. Use one of the following methods to verify or set thissystem value on the system:v Use the WRKSYSVAL QAUTOCFG command.v During a manual IPL, in the IPL Options window, select Y for Set major system options. Then, forEnable automatic configuration, select Y.Continue with Performing optional steps on the PC when changing from an Operations console to atwinaxial console.Related tasks“Performing optional steps on the PC when changing from an Operations Console to a twinaxialconsole”If the PC will not be used for Operations Console, follow these steps:Related informationAccess service toolsPerforming optional steps on the PC when changing from an Operations Console to a twinaxialconsole:If the PC will not be used for Operations Console, follow these steps:About this taskImportant: Perform these steps only after you are sure there are no problems with the twinaxial console.1. Disconnect the current console connection. To disconnect, do the following:66 System i: Connecting to System i Operations Console||
