Replacing an Adapter in a PCI Adapter CassetteCAUTION:Metal edges might be sharp.C38This procedure is performed when preparing to install a new adapter or a blank filler in the processorsubsystem or an I/O drawer. Familiarize yourself with the entire procedure before performing the followingsteps.1. Place the empty PCI Adapter Cassette Assembly linkage on a flat work surface in front of you. Positionthe cassette so that the handle is in the raised (up) position, and on the left, with the top of the linkagefacing away from you.Note: Your PCI Adapter Cassette Assembly linkage might not have the short or long adapter retainingarms or the middle-spacer arm installed if you removed them during the removal procedure. Inthe following illustration, both arms are shown.1 Handle2 Cassette Linkage Assembly3 Retaining Arms4 Middle-Spacer Arm152 Eserver pSeries 655 User’s Guide
