Allows setting of the system name.v Reset all L3 Cache Module RecordsClears L3 Gard records after a repair action.Note: This is a hidden menu option for use only by a service representative.Service Processor Setup MenuThe following Service Processor Setup Menu is accessed from the Main Menu:SERVICE PROCESSOR SETUP MENU1. Change Privileged Access Password2. Change General Access Password3. Enable/Disable Console Mirroring:Not Supported4. Start Talk ModeNot Supported5. OS Surveillance Setup Menu6. Reset Service Processor7. Reprogram Flash EPROM MenuNot Supported8. Serial Port Snoop Setup MenuNot Supported9. Scan Log Dump Setup Menu:Currently As Needed98. Return to Previous Menu99. Exit from Menus0>Note: Unless otherwise stated in menu responses, settings become effective when a menu is exited usingoption 98 or 99.Chapter 4. Using the Service Processor 23