Resetting the System Attention LEDThe system attention LED can be turned off by using the HMC or either of the alternate methods that aredescribed.Resetting the System Attention LED from the HMCTo reset the system attention LED from the HMC, do the following:1. On the HMC interface, click Service Applications.2. Double-click Service Focal Point.3. In the Contents area of the screen, select Hardware Service Functions. The LED Managementwindow opens.4. In the LED Management window, select one or more managed systems from the table.5. Select Deactivate LED. The associated system attention LED is turned off.For more information about the virtual operator panel on the HMC, see the IBM Hardware ManagementConsole for pSeries Installation and Operations Guide.Alternate Method of Resetting the System Attention LED Using the AIX CommandLineAs a user with root authority, enter diag on the AIX command line, and do the following:1. Select Task Selection.2. On the Task Selection Menu, select Identify and Attention Indicators.3. When the list of LEDs displays, use the cursor to highlight Set System Attention Indicator toNormal.4. Press Enter, and then press F7 to commit. This action turns off the LED.Alternate Method of Resetting the System Attention LED Using the ServiceProcessorIf the system is powered off, access the service processor menus. From the service processor main menu,do the following:1. Select the System Information Menu.2. Select LED Control Menu.3. Select Clear System Attention Indicator. This action turns off the LED.Chapter 2. Introducing the pSeries 655 13