b. Select the physical drive that you want to designate as the hot-spare drive,and click the (Add selected drives) icon.7. Click Next.8. Review the information in the “Configuration summary” window. To change theconfiguration, click Back.9. Click Apply; when you are asked whether you want to apply the newconfiguration, click Yes. The configuration is saved in the controller and in thephysical drives.10. Exit from ServeRAID Manager and remove the CD from the CD-RW/DVDdrive.11. Restart the server.Viewing the configuration: You can use ServeRAID Manager to view informationabout RAID controllers and the RAID subsystem (such as arrays, logical drives,hot-spare drives, and physical drives). When you click an object in the ServeRAIDManager tree, information about that object appears in the right pane. To display alist of available actions for an object, click the object and click Actions.Configuring simple-swap SATA RAIDImportant: HostRAID is not supported on the SCO 6.0 and UnixWare 7.14operating systems.Use the Adaptec HostRAID Configuration Utility program to add RAID level-0 andlevel-1 functionality to the integrated Serial ATA controller (simple-swap SATAmodels). Be sure to use this program as described in this document. Use thisprogram to perform the following tasks:v Configure a redundant array of independent disks (RAID) arrayv View or change the RAID configuration and associated devicesWhen you are using the Adaptec RAID Configuration Utility program to configureand manage simple-swap SATA arrays, consider the following information:v The integrated Serial ATA controller with integrated SATA RAID (simple-swapSATA models) supports RAID level-0 and level-1 with the option of having ahot-spare drive.v You cannot use the ServerGuide Setup and Installation CD to configure theintegrated Serial ATA controller with integrated RAID.v Hard disk drive capacities affect how you create arrays. Drives in an array canhave different capacities, but the RAID controller treats them as if they all havethe capacity of the smallest hard disk drive.v To help ensure signal quality, do not mix drives with different speeds and datarates.Using the Adaptec RAID Configuration Utility programUse the Array Configuration Utility to add RAID level-0 and level-1 functionality tothe integrated Serial ATA (SATA) controller. This utility is a part of the BIOS code.For additional information about using the Adaptec RAID Configuration Utilityprogram, see the documentation on the Adaptec HostRAID Support CD. If this CDdid not come with the server, you can download it from http://www.ibm.com/support/.Chapter 2. Configuration information and instructions 25
