ICON Health & Fitness Pro-form 765 crosstrainer User Manual

6ASSEMBLYTo hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do notdispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt iscoated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to thetop of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor-mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,non-abrasive cleaner.Assembly requires the included hex keys and your own Phillips screwdriver ,adjustable wrench , rubber mallet , and scissors .Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing isthe key number of the part, from the PART LIST near the end of this manual. The number after the parenthesesis the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to oneof the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly. Extrahardware may be included.#8 x 1/2"Screw (1)–23/8" Nut (8)–5#8 x 1" Tek Screw (2)–4Base PadSpacer (13)–23/8" StarWasher (9)–8#10 x 3/4"Screw (5)–2#8 x 3/4"Screw (12)–4#10 StarWasher (10)–2#8 x 3/4" HandrailScrew (15)–23/8" x 4 1/2" Bolt (6)–43/8" x 1 1/4" Bolt (7)–4 3/8" x 2" Bolt (4)–3Bolt Spacer (80)–43/8" x 2" Shoulder Bolt (111)–2#8 x 1/2" Washer HeadScrew (112)–4