I-7080, I-7080D, I-7080B, I7080BD User Manual (V 2.2) ------------------ 332.9 ~AAO(name) Description: Set module name. Syntax: ~AAO(name)[chk](cr)~ is a delimiter characterAA=2-character HEX module address, from 00 to FF(name)=4-character/5-character module name[chk]=2-character checksum, if checksum disable no [chk](cr)=0x0D Response: valid command !AA[chk](cr)invalid command ?AA[chk](cr)no response syntax error or communicationerror or address error! is a delimiter character indicating a valid command? is a delimiter character indicating a invalid commandAA=2-character HEX module address[chk]=2-character checksum, if checksum disable no [chk](cr)=0x0D Example:command: $01M(cr)response : !017080(cr)command: ~01O8080(cr)response : !01(cr)command: $01M(cr)response : !017080D(cr)command: ~01O8080D(cr)response : !01(cr)Note: This command is designed for OEM/ODM user. The usercan use it to change the module name for other purpose.Change module name from7080 to 8080Change module name from7080D to 8080D7080/7080D