ICP DAS USA I-7080 User Manual

ICP DAS USA I-7080 User Manual Manual pdf 77 page image

I-7080, I-7080D, I-7080B, I7080BD User Manual (V 2.2) ------------------ 772.53 @AARP Description: Read Hi-Hi-alarm limit of counter 0(for alarm-mode 1). Refer to Sec. 1.8.2 for more information. Syntax: @AARP[chk](cr)@ is a delimiter characterAA=2-character HEX module address, from 00 to FF[chk]=2-character checksum, if checksum disable no [chk](cr)=0x0D Response: valid command !AA(data)[chk](cr)invalid command ?AA[chk](cr)no response syntax error or communicationerror or address error! is a delimiter character indicating a valid command? is a delimiter character indicating a invalid commandAA=2-character HEX module address(data)=8-character HEX value.[chk]=2-character checksum, if checksum disable no [chk](cr)=0x0D Example:command: @01RP(cr)response : !01FFFF0000(cr)command: @02RP(cr)response : !020000FFFF(cr)The Hi-Hi-alarm limit ofcounter 0 is FFFF0000.The Hi-Hi-alarm limit ofcounter 0 is 0000FFFF.7080/7080D

/ 80

Related manuals for ICP DAS USA I-4080