ICP DAS USA I-7080 User Manual

ICP DAS USA I-7080 User Manual Manual pdf 39 page image

I-7080, I-7080D, I-7080B, I7080BD User Manual (V 2.2) ------------------ 392.15 $AA1H(data) Description: Set the high trigger level of non-isolated input. Referto Sec. 1.8.4 for more information. Syntax: $AA1H(data)[chk](cr)$ is a delimiter characterAA=2-character HEX module address, from 00 to FF(data)=2-character decimal value for high trigger level. The unitis 0.1 volt and the range can be from 0.0 to 5.0 volt.[chk]=2-character checksum, if checksum disable no [chk](cr)=0x0D Response: valid command !AA[chk](cr)invalid command ?AA[chk](cr)no response syntax error or communicationerror or address error! is a delimiter character indicating a valid command? is a delimiter character indicating a invalid commandAA=2-character HEX module address[chk]=2-character checksum, if checksum disable no [chk](cr)=0x0D Example:command: $011H24(cr)response : !01(cr)command: $021H30(cr)response : !02(cr) Note: default is 2.4V7080/7080DHigh trigger level=2.4 voltHigh trigger level=3.0 volt