ICP DAS USA I-7080 User Manual

ICP DAS USA I-7080 User Manual Manual pdf 35 page image

I-7080, I-7080D, I-7080B, I7080BD User Manual (V 2.2) ------------------ 352.11 $AA0H(data) Description: Set the min. input signal width at high level. Refer toSec. 1.8.5 for more information. Syntax: $AA0H(data)[chk](cr)$ is a delimiter characterAA=2-character HEX module address, from 00 to FF(data)=5-character decimal value for min. width at high level.The unit is uS and the range can be from 2 uS to 65535uS.[chk]=2-character checksum, if checksum disable no [chk](cr)=0x0D Response: valid command !AA[chk](cr)invalid command ?AA[chk](cr)no response syntax error or communication erroror address error! is a delimiter character indicating a valid command? is a delimiter character indicating a invalid commandAA=2-character HEX module address[chk]=2-character checksum, if checksum disable no [chk](cr)=0x0D Example:command: $010H00010(cr)response : !01(cr)command: $020H01000(cr)response : !02(cr)7080/7080DMin. width = 10 uSMin. width = 1000 uS = 1 mS