Publication date:March., 2011Revision A1253-1. Web Management Home OverviewAfter you login, the switch shows you the system information as Fig. 3-2. Thispage is default and tells you the basic information of the system, including “ModelName”, “System Description”, “Location”, “Contact”, “Device Name”, “System UpTime”, “Current Time”, “BIOS Version”, “Firmware Version”, “Hardware-MechanicalVersion”, “Serial Number”, “Host IP Address”, “Host MAC Address”, “Device Port”,“RAM Size” and “Flash Size”. With this information, you will know the softwareversion used, MAC address, serial number, how many ports good and so on. This ishelpful while malfunctioning.Fig. 3-2•••• The Information of Page Layout On the top side, it shows the front panel of the switch. In the front panel, thelinked ports will display green; as to the ports, which are link off, they will bedark. For the optional modules, the slot will show only a cover plate if nomodule exists and will show a module if a module is present. The image ofmodule depends on the one you inserted. The same, if disconnected, the portwill show just dark, if linked, green.In this device, there are clicking functions on the panel provided for theinformation of the ports. These are very convenient functions for browsing theinformation of a single port. When clicking the port on the front panel, aninformation window for the port will be pop out. (See Fig. 3-3)
