Parameter description:IGMP snooping mode selection:The switch supports to enable IGMP snooping functionEnable:Set “Enable” mode to enable IGMP Snooping function.Default: un-enable.Unregistered Multicast Flooding :The switch supports to enable Unregistered Multicast Flooding functionEnable:Set “Enable” mode to enable IGMP Snooping function.Default: EnableGeneral Query Interval :The general query interval is the amount of time in seconds betweenIGMP General Query messages sent by the router (if the router is thequerier on this subnet).Available value: 1-2000 secGeneral Query Max Response Time :The Maximum Response Time field is only used in general or group-specific query messages. The Maximum Response Time is configured asthe value for the Query response interval settingAvailable value: 1-10 secGeneral Query Timeout :The General Query Timeout field is the amount of time in seconds.Available value: 1-30 secSpecific Query Count :To set Specific Query Count on Switch .Available value: 1-10 timesSpecific Query Max Response Time :To set the specific Query Response Time field is used in specific orgroup-specific query messages. The Specific Maximum Response Timeis configured as the value.Available value: 1-10 secSpecific Query Timeout :The Specific Query Timeout field is the amount of time in seconds.Available value: 1-30 sec3-9-2. IGMP VLANFunction name:
