|
Publication date: Sep, 2009Revision A8683-9-3. Group AllowFunction name:Group AllowedFunction description:The Group Allowed function allows the IGMP Snooping to set up the IPmulticast table based on user’s specific conditions. IGMP report packets thatmeet the items you set up will be joined or formed the multicast group.Fig. 3-18Parameter description:IP Range:The switch supports two kinds of options for managed valid IP range,including “Any” and “Custom”. Default is “Any”. In case that” Custom”had been chosen, you can assigned effective IP range. The valid rangeis 224.0.0.0~239.255.255.255.VID:The switch supports two kinds of options for managed valid VLAN VID,including “Any” and “Custom”. Default is “Any”. When you choose“Custom”, you can fill in VID number. The valid VID range is 1~4094.Port:The switch supports two kinds of options for managed valid port range,including “Any” and “Custom”. Default is “Any”. You can select the portsthat you would like them to be worked and restricted in the allowed groupconfiguration if ”Custom” had been chosen.Add:A new entry of allowed group configuration can be created after theparameters as mentioned above had been setup and then press button.Edit:The existed entry also can be modified after pressing button.Delete:Remove the existed entry of allowed group configuration from the allowed group.
|
