3: I NSTALLATION AND WIRINGFC5A MICROS MART U SER’ S MANUAL FC9Y-B1268 3-23Terminal ConnectionCaution Make sure that the operating conditions and environments are within the specification values. Be sure to connect the grounding wire to a proper ground, otherwise electrical shocks may becaused. Do not touch live terminals, otherwise electrical shocks may be caused. Do not touch terminals immediately after power is turned off, otherwise electrical shocks may becaused. When using ferrules, insert a wire to the bottom of the ferrule and crimp the ferrule. When connecting a stranded wire or multiple solid wires to a screw terminal block, use a ferrule.Otherwise the wire may slip off the screw terminal block.Ferrules, Crimping Tool, and Screwdriver for Phoenix Terminal BlocksThe screw terminal block can be wired with or without using ferrules on the end of cable. Applicable ferrules for thePhoenix terminal blocks and crimping tool for the ferrules are listed below. The screwdriver is used for tightening thescrew terminals on the MicroSmart modules. These ferrules, crimping tool, and screwdriver are made by Phoenix Contactand are available from Phoenix Contact.Type numbers of the ferrules, crimping tool, and screwdriver listed below are the type numbers of Phoenix Contact.When ordering these products from Phoenix Contact, specify the Order No. and quantity listed below.Ferrule Order No.Quantity of Cables Cable Size Phoenix Type Order No. Pcs./Pkt.For 1-wire connectionUL1007 AWG16 AI 1,5-8 BK 32 00 04 3 100UL1007 AWG18 AI 1-8 RD 32 00 03 0 100UL1015 AWG22 AI 0,5-8 WH 32 00 01 4 100UL2464 AWG24 AI 0,25-8 YE 32 03 03 7 100For 2-wire connection UL1007 AWG18 AI-TWIN 2 x 0,75-8 GY 32 00 80 7 100UL1015 AWG22 AI-TWIN 2 x 0,5-8 WH 32 00 93 3 100Crimping Tool and Screwdriver Order No.Tool Name Phoenix Type Order No. Pcs./Pkt.Crimping Tool CRIMPFOX ZA 3 12 01 88 2 1ScrewdriverFor power supply terminals SZS 0,6 x 3,5 12 05 05 3 10For I/O modules, communication adapter, communication module,expansion RS232C/RS485communication modulesSZS 0,4 x 2,5 12 05 03 7 10Screw Terminal Tightening TorqueCPU modules 0.5 N·mI/O modulesCommunication adapterCommunication moduleExpansion RS232C/RS485communication modules0.22 to 0.25 N·mPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
