5: SPECIAL F UNCTIONS5-4 FC5A MICROS MART USER’ S MANUAL FC9Y-B1268Run/Stop Selection at Power UpStart control special internal relay M8000 maintains its status when the CPU module is powered down. When poweredup, the CPU module is started or stopped according to the M8000 status. The Run/Stop Selection at Power Up is used toselect whether to start or stop the CPU module regardless of the M8000 status when the CPU is powered up.When a memory cartridge is installed on a CPU module, the CPU module is started or stopped according to the M8000status of the CPU module. The CPU module can always be started regardless of the M8000 status by using Run/StopSelection at Power Up. WindLDR software is not needed to start the CPU module.Stop and Reset inputs have priority over start control special internal relay M8000. When the memory backup erroroccurs, the CPU module is started or stopped according to Run/Stop Selection at Memory Backup Error regardless ofRun/Stop Selection at Power Up. For start/stop operation, see page 4-5.Since this settings relate to the user program, the user program must be downloaded to the MicroSmart after changingthis settings.The Run/Stop Selection at Power Up can be used with the CPU module system program version 220 or higher.Programming WindLDR1. From the WindLDR menu bar, select Configuration > Run/Stop Control.The Function Area Settings dialog box for Run/Stop Control appears.2. Click the button under Run/Stop Selection at Power Up.Keep Run/Stop State at Power Down (Default)Click this button to keep the run/stop status at power down when the CPU module is powered up.Run (M8000 is turned on):Click this button to always start the CPU module when the CPU module is powered up.Stop (M8000 is turned off):Click this button to always stop the CPU module when the CPU module is powered up.This example designates KeepRun/Stop Status at PowerDown.Resets all Function Area Set-tings values to defaults.3. Click the OK button.Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
