IDK MSD-72 Series User Manual

Also see for MSD-72 Series: Command reference guide

Contents

IDK MSD-72 Series User Manual Manual pdf 108 page image

MSD-72 Series User’s Guide108VIDEO:OUT2-IN9,VIDEO:OUT2-OFFchannel of OUT2 VIDEO:OUT4-IN9,VIDEO:OUT4-OFFchannel of OUT4AUDIO:OUT2-IN1 toAUDIO:OUT2-IN9,AUDIO:OUT2-OFFSelecting audio inputchannel of OUT2AUDIO:OUT4-IN1 toAUDIO:OUT4-IN9,AUDIO:OUT4-OFFSelecting audio inputchannel of OUT49.12.4 Command executionMenu Top → PRESET COMMAND → COMMAND EXECUTIONSetting value CMD 1 to CMD 32, COMMAND A to COMMAND IYou can execute the registered control commands (CMD 1 to CMD 32).Only registered control command numbers are displayed as settable values. To execute the control command,press the “MENU/SET” key.【See: 9.12.1 Registering/editing control command】9.12.5 Invalid time during control command executionMenu Top → PRESET COMMAND → INVALID TIMESetting value 0s000ms to 999s999ms [Default]: 0s000msYou can set the waiting time from starting control command execution to receiving the next command. Usethis menu to prevent repeated execution caused by pressing the control command execution key twice.The longer time either of control command execution time or the time set in this menu will be applied as theinvalid operation time. Only operations from ports that execute control commands will be invalid; operationsfrom other ports can be performed. For example, if you execute a control command from the front panel, youcannot perform all operations from the front panel until the control command execution time or time set in thismenu passes. However, even during invalid operation time, DISPLAY POWER and CHANNEL SELECTcommands for different outputs can be executed consecutively .9.12.6 Initializing registered commands and associationsMenu Top → PRESET COMMAND → INITIALIZESetting valueCMD 1 to CMD 32: Control commandRCV 1 to RCV 32: Reply commandCOMMAND A to I: Control command associationPOWER ON: Control command associationSTANDBY: Control command associationDISPLAY1 POWER ON to DISPLAY4 POWER OFF: Control command associationVIDEO:OUT1-IN1 to VIDEO:OUT4-OFF: Control command associationAUDIO:OUT1-IN1 to AUDIO:OUT4-OFF: Control command associationYou can initialize the following commands and associations:▪ Control commands registered in “9.12.1 Registering/editing control command”