IDK MSD-72 Series User Manual

Also see for MSD-72 Series: Command reference guide

Contents

IDK MSD-72 Series User Manual Manual pdf 77 page image

MSD-72 Series User’s Guide779.7.11 HDCP re-authenticationMenu Top → OUTPUT SETTING → HDCP AUTHENTICATIONSetting for Each output channelIf a sink device supporting HDCP is connected, HDCP is authorized automatically. You can re-authorizeHDCP manually using this menu (connection Reset is performed automatically, but it can be performedmanually using this menu). Press the MENU/SET key to perform the re-authentication.9.7.12 Priority of input channel automatic switchingMenu Top → OUTPUT SETTING → AUTO SWITCHING ON / AUTO SWITCHING OFFSetting for Each output channelSetting value [Table 9.8] Setting of priority of input channel automatic switching[Table 9.8] Setting of priority of input channel automatic switchingItem Set value DefaultOutput channel (OUT) 1 to 4 -*Input channel (IN) 1 to 9 -*Priority (PRI) 1 (high) to 9 (low), OFF OFF*Setting each input channel priority to each output channel■ AUTO SWITCHING ONAUTO SWITCHING ON menu switches input signal when the input signal changes from “OFF” to “ON”.The MSD switches input signal automatically based on following conditions:・When the input signal become from “OFF” to “ON”, and that input channel has higher priority that currentchannel or same priority level.・When the input signal become from “OFF” to “ON”, and other input channels, that have higher priority thanthe input signal, do not have input signal.Input signal “OFF”→”ON” Input signal “ON”Input signal “ON”IN4 has lower priority than IN1.Input automatic switching will notbe executed.IN4 has higher priority than IN1.Input channel automatic switchingwill be executed.OFFIN 7IN 6IN 5IN 4IN 3IN 2IN 1OUT 1OUT 2IN 8 IN 9PRI 7PRI 6PRI 5PRI 4PRI 3PRI 2PRI 1 OFF OFFPRI 7 PRI 6 PRI 5 PRI 4 PRI 3 PRI 2 PRI 1 OFF OFFOFFIN 7IN 6IN 5IN 4IN 3IN 2IN 1OUT 1OUT 2IN 8 IN 9PRI 7PRI 6PRI 5PRI 4PRI 3PRI 2PRI 1 OFF OFFPRI 7 PRI 6 PRI 5 PRI 4 PRI 3 PRI 2 PRI 1 OFF OFFPRI * ・・・Priority for each input channel[Figure 9.16] Input channel automaic switching “OFF” to “ON”