MSD-72 Series User’s Guide669.6 Setting input timingYou can set input timing of analog input video if signal is input.Since the MSD loads the optimal table from the built-in tables and adjusts the input timing automatically, youdo not need to set this menu. However, if signal which are not registered in the MSD tables are input or if partof the output video is cut off by using the standard table registered in the MSD, set the input timing manually.For digital inputs, you do not need to set the input timing, but if part of the video is cut off, adjust the inputtiming finely.[Table 9.4] Settable itemsFunction Analog input Digital inputAutomatic measurement Partly 1 Cannot be setThe total number of horizontal dots Partly 1, Partly 2 Partly 2Start position Can be set Can be setActive area Can be set Can be setAutomatic measurement of start position Can be set Cannot be setAutomatic setting of input timing Can be set Cannot be setLoading device data Partly 3 Can be setRegistering device data Partly 1 Cannot be setTracking Partly 1 Cannot be setPartly 1: can be set only if analog RGB / analog YPbPr signal is input.Partly 2: only displayed if analog video signal is input or for digital input.Partly 3: can be set only if the device data of input signal is registered in theMSD.
