MSD-72 Series User’s Guide889.9.3 Input resolution for AV devicesMenu Top → EDID → AV RESOLUTIONSetting for Each input channel (only digital input signal)Setting value・AUTO [Default]・UNUSED・480p・720p・1080i・1080p・2160p@30*1・2160p@60 4:2:0*2・2160p@60 4:4:4*2・4096x2160@30*1・4096x2160@60 4:2:0*2・4096x2160@60 4:4:4*2*1 IN1 to IN7*2 IN1 to IN3You can set the resolution requested to be output from AV devices (such as Blu-ray players).This setting will be valid if “INTERNAL EDID” is selected for “9.9.1 EDID”.Normally, set this menu to “AUTO” to set resolution for AV devices according to “9.9.2 Resolution for PCs”automatically.“UNUSED” disables the EDID for AV devices. If you select “AUTO” and the resolution output from the PC isdifferent from the resolution set in Properties, the problem may be solved by selecting “UNUSED”.If there is a potential to connect both PCs and AV devices with different resolutions (for example, PC withWXGA (1366x768), Blu-ray disc player with 1080p), set the PC resolution in “9.9.2 Resolution for PCs” andselect the AV resolution in this menu. However, some PCs and AV devices may select the higher resolution ofthe resolutions set in “9.9.2 Resolution for PCs” or this menu.If a source device that does not support 4K is connected to the input connector with 4K EDID settings, thesource device may output DVI signal meaning audio is not output. In order to output HDMI signal from thesource device, change the settings of this menu and “9.9.3 Input resolution for AV devices” to a valueother than 4K.The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press theMENU/SET key to update the setting.[Table 9.13] Input resolutions when “AUTO” is selectedPCResolution640×480800×6001024×7681280×7201280×7681280×8001280×9601280×10241360×7681366×7681400×10501440×9001600×9001600×12001680×10501920×1080i1920×1080p1920×12002048×11522560 x 14402560 x 16002160@302160@60 4:4:4AVResolution480p720p1080i1080p2160p@302160p@60Note:If you select “UNUSED”, the settings of “9.9.4 Deep Color”, “9.9.5Audio format”, and “9.9.6 Speakerconfiguration” will be disabled and audio is not output because the source device outputs signal through DVImode.