IDK VAC-5000HD User Manual
Also see for VAC-5000HD: User guide
                                                 | |
Contents
| 
VAC-5000HD User’s Guide227.2.2 [F10] Setting EDID resolutionYou can set the EDID to be sent to the source device:In order to use a built-in EDID (setting numbers “03” to “22”), set the maximum resolution supported by thesink device using Set numbers “03” to “22”.[Table 7.4] The maximum resolution of EDIDSetnumberMaximum resolution Pixel Standard Remarks01 EXTERNAL (External EDID) － － If no collected data, its default is 03.02 Copied EDID － － If no collected data, its default is 03.03 1080p(59.94/60) 1920×1080 HDTV Default04 720p 1280×72005 1080i 1920×108006 1080p(24/25/30/50) 1920×108007 SVGA 800×600 VESA08 XGA 1024×76809 VESA720 1280×720 CVT For inputting DVI devices10 WXGA 1280×768 VESA11 WXGA 1280×800 MAC supported12 Quad-VGA 1280×96013 SXGA 1280×102414 WXGA 1360×7681366×768The number of pixels can be set in7.2.17 [F42] Selecting EDID forWXGA.15 SXGA+ 1400×105016 WXGA+ 1440×90017 WXGA++ 1600×900 (RB)18 UXGA 1600×120019 WSXGA 1680×105020 VESA1080 1920×1080 CVT (RB), for inputting DVI devices21 WUXGA 1920×1200 VESA (RB)22 QWXGA 2048×1152 (RB)(RB): Reduced Blanking |
Related manuals for IDK VAC-5000HD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine