IDK VAC-5000HD User Manual
Also see for VAC-5000HD: User guide
                                                 | |
Contents
| 
VAC-5000HD User’s Guide327.2.17 [F42] Selecting EDID for WXGAYou can set the number of WXGA pixels based on the resolution setting of EDID.Setting valueson: 1366×768oFF: 1360×768 [Default]Note: This is enabled only if one of 03 to 22 is selected for resolution setting of EDID.7.2.18 [F60 to F64] Setting output equalizerMenu numbersF60 to F64: OUT1 to OUT5Setting values0.0: OFF (No equalization) [Default]1.5: LOW3.5: MIDDLE6.0: HIGHNotes:● If you use a 5 m/16.4 feet or longer cable for output, we recommend that you check the configuration withactual devices in advance, because it largely depends on jitter characteristic of the sink device.● Set the equalizer value before using the VAC, since the images sometimes are interrupted when thesetting is changed.7.2.19 [F70 to F74] Setting audio outputYou can set whether the audio is turned ON or OFF for each of the HDMI output connectors.Menu numbersF70 to F74: OUT1 to OUT5Setting valueson: ON [Default]oFF: OFF |
Related manuals for IDK VAC-5000HD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine