IDK VAC-5000HD User Manual
Also see for VAC-5000HD: User guide
                                                 | |
Contents
| 
VAC-5000HD User’s Guide267.2.6 [F20] Setting Deep ColorYou can set the Deep Color (color depth) that is output from the source device.Setting values08: 24bit/pixel (8bit/component) [Default]10: 30bit/pixel (10bit/component)12: 36bit/pixel (12bit/component)Notes:● If you select “30bit/pixel (10bit/component)” or “36bit/pixel (12bit/component)”, the transmission clock willbe faster resulting in noise on video when a poor-quality cable or long cable is connected. In this case,change the setting to “24bit/pixel (8bit/component)”.● This is enabled only if one of 03 to 22 is selected for the EDID resolution.7.2.7 [F22] Setting PCM AudioYou can set the maximum sampling frequency of PCM Audio that is output from the source device.Setting values32: 32 kHz44: 44.1 kHz48: 48 kHz [Default]88: 88.2 kHz96: 96 kHz192: 192 kHzNotes:● Some LCD monitors do not support some audio formats. Select the audio format and sampling frequencysupported by your devices.● This is enabled only if one of 03 to 22 is selected for the resolution setting of EDID.7.2.8 [F24] Setting AC-3 Dolby Digital AudioYou can set the maximum sampling frequency of AC-3 Dolby Digital Audio that is output from the sourcedevice.Setting values32: 32 kHz44: 44.1 kHz48: 48 kHzoFF: OFF [Default]Notes:● Some LCD monitors do not support some audio formats. Select the audio format and sampling frequencysupported by your device.● This is enabled only if one of 03 to 22 is selected for the resolution setting of EDID. |
Related manuals for IDK VAC-5000HD
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine