IDS LCD Digital Keypad User Manual

Also see for 1632: Installer manual User manual

IDS LCD Digital Keypad User Manual Manual pdf 14 page image

14IDS LCD Keypad User Manual 700-292-01C Issued March 2009IDS 1224 1 - 2 4 12IDS 1632 1 - 32 12For detailed programming instructions, please see the installation manual provided with your AlarmPanel.1. Press [#] + [INSTALLER CODE] + [*].If the default installer code is four digits it will be [9999], if it is six digits, it will be [999999].2. Enter the [LOCATION] as per table 1 above followed by the [*] key.3. Enter the [SUB-LOCATION 12] followed by the [*] key.4. Edit the Zone Name.Notes on Editing a Zone Name Use the [MODE] key to toggle between upper and lower case. Use the [1] key to display a 1, to create a space or to display the following punctuation marks : ' ! - Use the [PANIC] key to scroll to the right. Use the [MED] key to scroll to the left. Pressing a key once will display the first letter displayed on the key. Pressing a key twice displaysthe second letter on the key etc. Numerics are displayed after all available letters have beendisplayed i.e. to display a 2, press the relevant key four times. If you wish to use a different letter on the same key press the key the required number of times todisplay the relevant letter, pause for one second. Once the cursor has advanced, you may beginentering the next letter.8. User CodesEach of the IDS Alarm Panels has a certain number of programmable user codes as displayed in Table 2below. By default User Code 1 is the Master User Code which contains a pre-programmed 4 digit codeof 1234.The number of partitions which can be programmed by your programmer also varies for the different IDSAlarm Panels.A partition is a group of zones which may be armed and disarmed independently without affecting zonesor users assigned to other partitions.I.e. a guest cottage appended to a main house may be partition 2. The main house being partition 1.NOTE:User codes may be 4 (default) or 6 digits long. This is a programmable feature. Check with your installerto verify which option has been programmed.Table 2 : Alarm Panel FeaturesAlarm Panel No. of User Codes No. of PartitionsIDS 816 32 1 - 2IDS 1224 64 1 – 4IDS 1632 250 1 – 8