PICOe-PV-D510 User ManualPage 103Î Change Supervisor PasswordUse the Change Supervisor Password to set or change a supervisor password. Thedefault for this option is Not Installed. If a supervisor password must be installed, selectthis field and enter the password. After the password has been added, Install appearsnext to Change Supervisor Password.Î Change User PasswordUse the Change User Password to set or change a user password. The default for thisoption is Not Installed. If a user password must be installed, select this field and enter thepassword. After the password has been added, Install appears next to Change UserPassword.Î Clear User PasswordUse the Clear User Password to clear a user’s password. The default for this option isNot Installed. If a user password must be cleared, use this option.Î Boot Sector Virus Protection [Disabled]Use the Boot Sector Virus Protection to enable or disable boot sector protection.Î Disabled D EFAULT Disables the boot sector virus protectionÎ Enabled Enables the boot sector virus protection5.7 ChipsetUse the Chipset menu (BIOS Menu 23) to access the Northbridge and Southbridgeconfiguration menusWARNING!Setting the wrong values for the Chipset BIOS selections in the ChipsetBIOS menu may cause the system to malfunction.
