PICOe-PV-D510 User ManualPage 514.6.2 Backplane InstallationBefore the PICOe-PV-D510 can be installed into the chassis, a backplane must first beinstalled. Please refer to the installation instructions that came with the backplane and thechassis to see how to install the backplane into the chassis.NOTE:IEI has a wide range of backplanes available. Please contact yourPICOe-PV-D510 vendor, reseller or an IEI sales representative atsales@iei.com.tw or visit the IEI website (http://www.ieiworld.com.tw)to find out more about the available chassis.4.6.3 CPU Card InstallationTo install the PICOe-PV-D510 CPU card onto the backplane, carefully align the CPU cardinterface connectors with the corresponding socket on the backplane. To do this, pleaserefer to the reference material that came with the backplane. Next, secure the CPU card tothe chassis. To do this, please refer to the reference material that came with the chassis.4.7 Internal Peripheral Device Connections4.7.1 Peripheral Device CablesThe cables listed in 6 Table 4-7 are shipped with the PICOe-PV-D510.Quantity Type1 Keyboard and Mouse Y cable3 SATA drive cable1 Dual port USB cable1 Dual RS-232 cableTable 4-7: IEI Provided Cables
