PICOe-PV-D510 User ManualPage 72Î Enhanced D EFAULT Configures the on-board ATA/IDE controller to be inEnhanced mode. In this mode, IDE channels and SATAchannels are separated. This mode supports up to 6storage devices. Some legacy OS do not support thismode.Î Configure SATA as [IDE]Use the Configure SATA as option to configure SATA devices as normal IDE devices.Î IDE D EFAULT Configures SATA devices as normal IDE device.Î AHCI Configures SATA devices as an ACHI device.Î IDE Master and IDE SlaveWhen entering setup, BIOS automatically detects the presence of IDE devices. BIOSdisplays the status of the auto detected IDE devices. The following IDE devices aredetected and are shown in the IDE Configuration menu: Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Third IDE SlaveThe IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for theIDE devices installed in the system. If an IDE device is detected and one of the abovelisted four BIOS configuration options are selected, the IDE configuration options shown inSection 5.3.2.1 appear.5.3.2.1 IDE Master, IDE SlaveUse the IDE Master and IDE Slave configuration menu to view both primary andsecondary IDE device details and configure the IDE devices connected to the system.
