PPC-5190 Flat Panel PCPage 129Î Init. Graphic Adapter Priority [PCI/Int-VGA]The Init. Graphic Adapter Priority option selects the graphics controller the system uses asa primary boot device. The options are: Internal VGA PCI/Int-VGA D EFAULTÎ Internal Graphics Mode Select [Enable, 8MB]Use the Internal Graphic Mode Select option to specify the amount of system memory thatcan be used by the Internal graphics device.Î DisableÎ Enable, 1MB 1MB of memory used by internal graphics deviceÎ Enable, 4MB 4MB of memory used by internal graphics deviceÎ Enable, 8MB D EFAULT 8MB of memory used by internal graphics deviceÎ Enable, 16MB 16MB of memory used by internal graphics deviceÎ Enable, 32MB 32MB of memory used by internal graphics deviceÎ Graphics Aperture Size [64MB]The Graphics Aperture Size option selects the size of the AGP aperture. The aperture is aportion of the PCI memory address range dedicated as graphics memory address space.Î 64MB D EFAULT Graphics aperture size set as 64MBÎ 128MB Graphics aperture size set as 128MB
