PPC-5190 Flat Panel PCPage 613-12). Ensure that all four of the mounting screws fit snuggly into their respectiveslotted holes.NOTE:In the diagram below the bracket is already installed on the wall.Figure 3-12: Mount the ChassisStep 9: Secure the panel PC with the wall-mounting kit. To do this, stick the protectivecushion to the wall-mounting kit first. Then, put the wall-mounting kit on the toppanel of the panel PC. Carefully mark the location of the wall-mounting kit screwholes on the wall. Drill a pilot hole at the marked location on the wall. Secure thewall-mounting kit to the wall by inserting a retention screw into the pilot hole onthe wall (Figure 3-13). This step is to avoid the panel PC being pushed apartfrom the wall-mounting bracket accidentally. Step 0:
