PPC-5190 Flat Panel PCPage 543.6.2 FDD InstallationTo install the FDD, please follow the steps below:Step 1: Remove the back cover (Section 3.5.1).Step 2: The FDD bracket is attached to the elevated platform by two retention screws(Figure 3-3). Remove the two retention screws from the elevated platform.Step 3: Remove the FDD bracket by sliding toward the HDD.Figure 3-3: FDD Retention ScrewsStep 4: Attach the FDD adapter to the FDD by aligning the two retention screw holes inthe FDD adapter with the retention screw holes on the rear side of the FDDbracket. Insert two retention screws into the adapter (Figure 3-4). Connect theFDD adapter and FDD with ribbon cable.
