uIBX-200-VX800 Embedded SystemPage 415.3.2.1 SATA ChannelSets the IDE configuration of the SATA channels.BIOS SETUP UTILITYMain Advanced PCIPNP Boot Security Chipset ExitPrimary IDE Master⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯Device :Not DetectedType [Auto]LBA/Large Mode [Auto]Block (Multi-Sector Transfer) [Auto]PIO Mode [Auto]DMA Mode [Auto]S.M.A.R.T. [Auto]32Bit Data Transfer [Enabled]Select the type of deviceconnected to the systemÅÆ Select Screen↑ ↓ Select ItemEnter Go to SubScreenF1 General HelpF10 Save and ExitESC Exitv02.61 ©Copyright 1985-2006, American Megatrends, Inc.BIOS Menu 5: IDE Master and IDE Slave Configuration Type [Auto]Use the Type BIOS option select the type of device the AMIBIOS attempts to boot fromafter the Power-On Self-Test (POST) is complete.Î Not Installed BIOS is prevented from searching for an IDE diskdrive on the specified channel.Î Auto D EFAULT The BIOS auto detects the IDE disk drive typeattached to the specified channel. This setting shouldbe used if an IDE hard disk drive is attached to thespecified channel.Î CD/DVD The CD/DVD option specifies that an IDE CD-ROMdrive is attached to the specified IDE channel. TheBIOS does not attempt to search for other types ofIDE disk drives on the specified channel.