Icom IC-7100 Basic Manual

Also see for IC-7100: Finger touch operation Specification Service manual Advanced instructions Instruction manual

Contents

Icom IC-7100 Basic Manual Manual pdf 43 page image

3BASIC OPERATION3-11Setting frequency (Continued)Direct frequency inputDThe transceiver has a Direct input screen for direct fre-quency entry, as described below.• Operating frequency inputTouch the MHz digits to enter the Band selection dis-qplay.Touch [F-INP](w D) to enter the Direct input screen.Touch the desired number to enter the desired fre-equency.• If a most significant digit is inputted, it will be displayed atthe 10 Hz digit, and then next digit is inputted, a displaywill be shifted to left side one by one.• If the numbers for the MHz digits are inputted, and then“.” is touched, the inputted numbers will be shifted to theMHz digits.Touch [ENT](r D) to input the frequency.• If a most significant digit is inputted, it will be displayed atthe 10 Hz digit, and then next digit is inputted, a displayshifts to left side one by one.• When not having inputted below a 100 kHz digit, touch[ENT](D) to set all uninputted digits to “0.”• If desired, touch “CE” to delete entering.• If desired, touch [](D) or push MENU (C) to exit theDirect input screen.[Example]To enter the 14.025 MHz frequency:Touch [1], [4], [• (–)], [0], [2], [5] then [ENT].➥To enter the 18.0725 MHz frequency:Touch [1], [8], [• (–)], [0], [7], [2], [5] then [ENT].➥To enter the 706 kHz frequency:Touch [0], [• (–)], [7], [0], [6] then [ENT].➥To enter the 5.100 MHz frequency:Touch [5], [• (–)], [1] then [ENT].➥To enter the 7.000 MHz frequency:Touch [7] then [ENT].➥To change the 21.280 MHz to 21.245 MHz:Touch [• (–)], [2], [4], [5] then [ENT].➥The L, R, C or D in the in-structions indicate the partof the controller.L: Left sideR: Right sideC: Center bottomD: Display (Touch screen)Left RightCenterDisplay• Direct input screenEnter a “.” decimal point,or minus (–) input for Split offsetDelete enteringEnter the Split off-setEnter the MemorychannelEnter the frequen-cyCancel editShows the inputdigitsTouch the MHzdigitsTouch [F-INP]