Icom IC-80AD Instruction Manual

Also see for IC-80AD: Operating guide Service manual Service manual

Contents

Icom IC-80AD Instruction Manual Manual pdf 116 page image

N Skip channel/frequency settingMemory channels can be set to be skipped during memoryskip scan. In addition, memory channels can be set to beskipped during both memory skip scan and frequency skipscan. This is useful to speed up the scan rate.q Select a memory channel:± Push [M/CALL] to select memory mode.± Rotate [DIAL] to select the desired channel to be a skipchannel/frequency.[DIAL]wPush and hold [S.MW](M/CALL) for 1 sec. to enter selectmemory write mode.e Push [∫](2) or [√](8) several times to select “SKIP.”[DIAL]Push orseveral times.r Rotate [DIAL] to select the skip condition from “SKIP,”“PSKIP” or “OFF” for the selected channel.• PSKIP : The channel is skipped during memory/bank scan andthe programmed frequency is skipped during VFO scan,such as programmed scan.• SKIP : The channel is skipped during memory or bank scan.• OFF : The channel is scanned during any scan.(Continue to the next page.)10810 SCAN OPERATION