11211 PRIORITY WATCHN Priority watch operationD Memory/call channel and memory scan watchq Select VFO mode; then, set an operating frequency.w Select the channel(s) to be watched.For memory channel watch:Select the desired memory channel.For call channel watch:Select the desired call channel.For memory scan watch:± Select memory mode, or the desired bank group.± Push and hold [SCAN](V/MHz) for 1 sec. to enter thescan type selection.± Rotate [DIAL] to select the desired scan type, then push[SCAN](V/MHz) again to start memory/bank scan.e Enter “PRIO” in SCAN set mode. MENU ¶ SCAN ¶ PRIO (p. 121)(Push [MENU ]), (Push [](2)/[](8), then push [ ](5).)r Push [](2) or [](8) to select “ON.”• Select “BELL” if the priority beep function is desired.t Push [MENU ] to exit SCAN set mode and start thewatch.• “PRIO” indicator appears.• The transceiver checks the memory/bank channel(s) or callchannel every 5 sec.• The watch resumes according to the selected scan resume con-dition. (p. 110)y Push [V/MHz] to cancel the watch.Monitors VFO frequencyfor 5 sec.Pauses on a memoryor call channel whena signal is received.• During priority watchEmits beep and blinks “S” indicator when a signal isreceived on a memory or call channel.• During priority watch with priority beep
