637DV MODE OPERATION7D Calling a specific station in the same area (Area call) 1234568910111213141516171819qSet the desired repeater’s frequency, offset and shift direc-tion (pgs. 23, 31), then select the DV mode (p. 25).Your own call sign (step w) and station call sign (step e)can also be set as same as repeater call signs in currentcall sign mode (step r).wSet the current call sign to your own call sign.• See pgs. 47, 48 for current call sign setting details.eSet the current station call sign as follows:z Push and hold [UR](.) for 1 sec. to enter UR call signselection mode.x Rotate [DIAL] to select the desired station call sign.• Push [BAND] several times to select “GRP UR” in advance.c Push [UR](.) again to return to frequency indication.r Set the current repeater’s call sign as follows:z Push and hold [CS](9) for 1 sec. to enter the current callsign mode.• UR call sign is displayed.• Push and hold [CS](9) for 1 sec. to toggle the call sign andrepeater name indications.x Push [](2) or [](8) to select “R1,” access repeater’scall sign, then push [ ](5) to enter the current call signselection mode.c Push [](2) or [](8) to select the desired access re-peater’s call sign, then push [ ](5) to set the call signfor “RPT1.”• Return to the current call sign mode.v Push [](2) or [](8) to select “R2,” link repeater’s call sign,then push [ ](5) to set the current call sign selection mode.• “RPT2” call sign screen is displayed.b Push [](2) or [](8) to select “NOT USE,” then push[ ](5).• Return to the current call sign mode.n Push [V/MHz] to return to frequency indication.t Push [PTT] to transmit; release to receive.• UR call sign is displayed and scrolled in sequence on the fre-quency display depending on “TX CS” setting (p. 135).• Current call sign setting exampleMy call signJA3YUAStation call signJG3YMKRepeater q JP3YHLq w e rUR MYR1 R2: (NOT USE)AreaZonePushing [BAND] selects the repeater group when selection.
