446 DV MODE PROGRAMMING Repeater name programming (R-NAME)qPush [ ](5) to enter the repeater name programmingstate.• Repeater name programming screen is displayed.• The 1st digit blinks.wPush [](2) or [](8) to select the desired character, num-ber, symbol or space.• The selected character blinks.• Push [](6) to move the cursor right; push [](4) to move thecursor left.• Push [CLR](1) to erase the selected character, or push and hold[CLR](1) for 1 sec. to erase all characters following the cursor.eRepeat step w until the desired repeater name is pro-grammed.• Up to an 8 digit name can be set.rPush [ ](5) to program the repeater name and exit thestate. Repeater call sign programming (CALL S)q Push [ ](5) to enter the repeater call sign programmingstate.• Repeater call sign programming screen is displayed.• The 1st digit blinks.w Push [](2) or [](8) to select the desired character, num-ber or symbol (‘/’ only).• The selected character blinks.• Push [](6) to move the cursor right; push [](4) to move thecursor left.• Push [CLR](1) to erase the selected character, or push and hold[CLR](1) for 1 sec. to erase all characters following the cursor.e Repeat step w until the desired repeater call sign is pro-grammed.• Up to an 8 digit call sign can be set.r Push [ ](5) to program the repeater call sign and exit thestate.
