Icom IC-E90 Instruction Manual

Also see for IC-E90: Service manual Service manual

Contents

Icom IC-E90 Instruction Manual Manual pdf 24 page image

194 BASIC OPERATIOND Setting the frequency with keypadq Select VFO mode with [VFO].w Push the desired numeral buttons until inputting 1 kHz digit to set the frequency.• When you want to change the 100 kHz digit and below, push [•] first, then the numeral but-tons.• Acceptable digits for the 1 kHz digit depend on the 10 kHz digit.■ Setting a frequencyPush numeral keys and [•] to input thedesired frequency.• Frequency can be set irrelevant of the se-lected band.• When inputting a frequency outside of thefrequency range, the previously selectedfrequency is automatically selected after in-putting 1 kHz digit.* Available frequency range and/or thepre-programmed TV memories maydiffer depends on version. See p. 85for details.1V D2TONE3H / L4DUP5SKIP6M.N0RIT7T.SCAN8SET9TS.DTMF.M[VFO]2TONE4DUP.DTMF.M0RIT6M.N8SET.DTMF.MFMFMFMFMFMSKIPPSKIPPSKIPPSKIPPSKIPP0RIT4DUP5SKIP3H / L3H / L4DUP8SET.DTMF.MFMFMFMFMFMFMFM0RITSKIPPSKIPPSKIPPSKIPPSKIPPSKIPPSKIPP• Setting to 0.684 MHz • Setting to 433.580 MHz • Changing 100 kHz andbelow.Setting 433.580 MHz to433.240 MHz.