Icom IC-E90 Instruction Manual

Also see for IC-E90: Service manual Service manual

Contents

Icom IC-E90 Instruction Manual Manual pdf 34 page image

294 BASIC OPERATION■ Repeater operationWhen using a repeater, the transmit frequency is shifted fromthe receive frequency by the offset frequency. (p. 31) It is con-venient to program repeater information into memory chan-nels. (p. 37)q Set the receive frequency (repeater output frequency).w Set the shift direction of the transmit frequency. (–DUP orDUP; see p. 31 for details.)e Push [2 TONE] for 1 sec. to activate the subaudible toneencoder, according to repeater requirements.• “T” appears. Refer to p. 70 for tone frequency settings.r Push and hold [PTT] to transmit.• The displayed frequency au-tomatically changes to thetransmit frequency (repeaterinput frequency).• If “OFF” appears, check theoffset frequency or shift di-rection. (p. 30)t Release [PTT] to receive.y Push and hold [SQL] to check whether the other station’stransmit signal can be directly received or not.FM DUPSKIPTPFM DUPSKIPTPWhile receiving While transmittingFM DUPSKIPTP“DUP” appears.Station A Station BRepeater439.340 MHz434.340 MHz 434.340 MHz439.340 MHzUplinkDownlink(transmitting freq.)(receiving freq.) Lightsred whiletransmitting.[PTT]