Icom IC-E90 Instruction Manual

Also see for IC-E90: Service manual Service manual

Contents

Icom IC-E90 Instruction Manual Manual pdf 83 page image

789OTHER FUNCTIONS■ ResettingThe function display may occasionallydisplay erroneous information (e.g.when first applying power). This may becaused externally by static electricity orby other factors.If this problem occurs, turn power OFF.After waiting a few seconds, turn powerON again. If the problem persists, per-form either or both procedures below.• All resetReset the CPU before operating thetransceiver for the first time, or whenthe internal CPU malfunctions to clearand return all programmed contents totheir default settings.• Partial resetIf you want to initialize the operatingconditions (VFO frequency, VFO set-tings, set mode contents) without clear-ing the memory contents, a partialresetting function is available for thetransceiver.D All resetq Push [POWER] for 2 sec. to turnpower OFF.w While pushing [BAND], [VFO] and[MR], turn power ON to reset theCPU.• “CLEAR” appears when resetting theCPU.CAUTION: Resetting the CPU re-turns all programmed contents totheir default settings.D Partial resetq Push [POWER] for 2 sec. to turnpower OFF.w While pushing [VFO], turn power ONto partially reset the transceiver.• All resettingFMSKIPP[PWR][BAND][VFO][MR]ooOTHER FUNCTIONS