Icom IC-E90 Instruction Manual

Also see for IC-E90: Service manual Service manual

Contents

Icom IC-E90 Instruction Manual Manual pdf 53 page image

486SCAN OPERATIONyySCAN OPERATION■ Memory scanMemory scan repeatedly scans all memory channels exceptskip channels.There are 3 types of memory scan, select band scan, fullbank scan and bank scan are available.D Full memory scan/Select band scanq Push [MR] to enter memory mode.w While pushing and holding [MODE SCAN], rotate [DIAL] toselect from scan-guidance, [ALL], [SEL BC], [SEL 5], [SEL50], [SEL WFM], [SEL AIR], [SEL 144], [ SEL 220], [SEL300], [SEL 440] or [SEL 800].• [ALL] scans full programmed memories except skip channels.• Scan-guidance appear(s) programmed band(s) only.• Scan repeatedly scans memory channels except skip channelswithin a selected memory band.e Release [MODE SCAM] to start the memory scan.• Decimal point blinks while scanning.• To change the scanning direction, rotate [DIAL].• While receiving an unwanted signal and scan pauses, push [5SKIP] for 1 sec. to set the received channel as a skip channel.r Push [VFO] to stop the scan.D Full bank scan/Bank scanBank scan repeatedly scans memory channels except skipchannels within a selected memory bank.q Push [MR] to enter the memory bank mode.• Pushing [MR] to toggles the memory channel and memory bankmodes.• Program 2 or more memory channels to a memory bank in ad-vance.w Push [BAND] several times to select the desired memorybank if desired.e While pushing [MODE SCAN], rotate [DIAL] to select [ALL]or [BANK].• “ALL” scans for full bank or “BANK” scans for within a specifiedmemory bank only.r Release [MODE SCAN] to start the memory scan.• Decimal point blinks while scanning.• To change the scanning direction, rotate [DIAL].t Push [VFO] to stop the scan.FMSKIPPRelease [MODE SCAN]Full bank scanSelect band scanFMSKIPP*Flashes while scanning.FMSKIPPBank scan*** ****Bank name appears.