Icom IC-F1721 Instruction Manual

Also see for IC-F1721: Instruction manual Operating guide

Icom IC-F1721 Instruction Manual Manual pdf 7 page image

31PANEL DESCRIPTION1y BELL INDICATORAppears/blinks when the specific 2/5-tone/BIIS code isreceived, according to the pre-programming.u CALL CODE MEMORY INDICATORAppears when the call code memory is selected.i SCROLL INDICATORAppears when a received SDM including more than 12characters is displayed.o SDM INDICATORAppears when an SDM is received, or a transmit SDM isselected.!0 ALPHANUMERIC DISPLAYDisplays an operating channel number, channel name, Setmode contents, DTMF code, etc.The indication mode can be selected from 1 line or 2 lines.Ask your dealer for details.In this instruction manual, the LCD illustration is describedusing the 2 lines indication mode.!1 ACTIVATED KEY INDICATORAppears above the key assigned as [DIGITAL] key whenthat key has been activated. Programmable function keysThe following functions can be assigned to [DIAL]*, [UP],[DOWN], [P0], [P1], [P2], [P3] and [P4] programmable func-tion keys.Consult your Icom dealer or system operator for details con-cerning your transceivers programming.If the programmable function names are bracketed in the fol-lowing explanations, the specific key is used to activate thefunction depends on the programming.*The functions you can assign to [DIAL] are limited.(Only functions marked with ✩ can be assigned.)✩ CH UP AND DOWN KEYS➥ Push (or Rotate)* to select an operating channel.➥ Push (or Rotate)* to select a transmit code channel afterpushing [TX Code CH Select].➥ Push (or Rotate)* to select a DTMF channel after pushing[DTMF Autodial].➥ Push (or Rotate)* to select a scan group after pushing andholding [Scan A Start/Stop]/[Scan B Start/Stop].➥ Push (or Rotate)* to select a BIIS code, status number orSDM after pushing [Digital].➥ Push (or Rotate)* to select an Individual ID code orTalkgroup ID code after pushing [Individual] or [Talkgroup].*Rotate when this function is assigned to [DIAL].✩ ZONE UP AND DOWN KEY (This function is for [DIAL] only)Rotate to select the desired zone.