Icom IC-F6062D Operating Manual

Also see for IC-F5062D: Instruction manual Instruction manual Instruction manual Instructions

Contents

Icom IC-F6062D Operating Manual Manual pdf 21 page image

3dPMR OPERATION1234567891011121314151618■ Transmitting a calldPMR operation allows you to make a call to a specific sta-tion (Individual call) or to a particular group (Talkgroup call).Other digital mode transceivers on the channel will not re-ceive a call that does not match their Individual or TalkgroupID and/or colour code.D General• Editing an IDIf the transceiver has a key assigned to the TX Code Enterfunction, you can edit an ID within the allowable digits.q Push [TX Code Enter] to enter the ID edit mode.• The digit to be edited blinks.w Push [TX Code Enter] to select a desired digit to be ed-ited.e Push [CH UP] or [CH DOWN] to select a desired number.r Push [TX Code Enter] to set. The digit to the right will au-tomatically blink.t Repeat step e and r to input all allowable digits.y After editing, push [TX Code Enter] to store the setting.• The transceiver returns to the stand-by mode.NOTE: Changing the channel or turning OFF the trans-ceiver discards the new ID, and returns the original one.• When no acknowledgement is receivedAfter making a call, the transceiver waits for an acknowledge-ment for the pre-programmed time period. If no acknowledge-ment is received, the transceiver automatically repeats thecall 4 times (default). However, when no acknowledgementis received after each of the calls, an error beep sounds and“FAILED” is displayed. In that case, the transceiver automati-cally returns to the stand-by mode.• About the HM-152TIf the optional HM-152T hand microphone is connected, thekeypad allows you to:- Select an ID list number while in the ID selection mode.- Select a Status list number while in the status message se-lection mode.- Select an SDM list number while in the SDM selection mode.- Edit an SDM while displaying it. (p. 22)NOTE: Depending on the pre-programmed settings, addi-tional functions can be used with the HM-152T. Ask yourdealer for details.